Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 478
match srcl4port, match vlan, match secondary-vlan
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 478 highlights
ProSafe Managed Switch Format Mode match srcip6 Ipv6-Class-Map Config match srcl4port This command adds to the specified class definition a match condition based on the source layer 4 port of a packet using a single keyword or numeric notation. To specify the match condition as a single keyword notation, the value for is one of the supported port name keywords (listed below). The currently supported values are: domain, echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp, www. Each of these translates into its equivalent port number, which is used as both the start and end of a port range. To specify the match condition as a numeric value, one layer 4 port number is required. The port number is an integer from 0 to 65535. Default Format Mode none match srcl4port { | } Class-Map Config Ipv6-Class-Map Config match vlan This command adds to the specified class definition a match condition based on the value of the layer 2 VLAN Identifier field (the 802.1Q tag of a VLAN tagged packet). The VLAN is an integer from 0 to 4095. Default Format Mode none match vlan {} Class-Map Config Ipv6-Class-Map Config match secondary-vlan This command adds to the specified class definition a match condition based on the value of the layer 2 secondary VLAN Identifier field (the 802.1Q tag of a double VLAN tagged packet). The VLAN is an integer from 0 to 4095. Default Format Mode none match secondary-vlan {} Class-Map Config Ipv6-Class-Map Config Quality of Service (QoS) Commands 478