Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 702
show radius accounting, If you do not specify any parameters
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 702 highlights
ProSafe Managed Switch 192.168.37.201 192.168.37.202 192.168.37.203 Network2_RADIUS_Server Network3_RADIUS_Server Network4_RADIUS_Server 1813 Secondary 1813 Primary 1813 Secondary (Switch) #show radius servers name Current Host Address Server Name Type 192.168.37.200 Network1_RADIUS_Server Secondary 192.168.37.201 Network2_RADIUS_Server Primary 192.168.37.202 Network3_RADIUS_Server Secondary 192.168.37.203 Network4_RADIUS_Server Primary (Switch) #show radius servers name Default_RADIUS_Server Server Name Default_RADIUS_Server Host Address 192.168.37.58 Secret Configured No Message Authenticator Enable Number of Retransmits 4 Time Duration 10 RADIUS Accounting Mode Disable RADIUS Attribute 4 Mode Enable RADIUS Attribute 4 Value 192.168.37.60 (Switch) #show radius servers 192.168.37.58 Server Name Default_RADIUS_Server Host Address 192.168.37.58 Secret Configured No Message Authenticator Enable Number of Retransmits 4 Time Duration 10 RADIUS Accounting Mode Disable RADIUS Attribute 4 Mode Enable RADIUS Attribute 4 Value 192.168.37.60 show radius accounting Use this command to display a summary of configured RADIUS accounting servers. Format Mode show radius accounting name [] Privileged EXEC Field servername RADIUS Accounting Mode Description An alias name to identify the server. A global parameter to indicate whether the accounting mode for all the servers is enabled or not. If you do not specify any parameters, then only the accounting mode and the RADIUS accounting server details are displayed. Management Commands 702