Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 263

ProSafe Managed Switch Parameter Description Heap Size The amount of memory, in bytes, allocated at startup for the routing heap. Memory In Use The number of bytes currently allocated. Memory on Free List The number of bytes currently on the free list. When a chunk of memory from the routing heap is freed, it is placed on a free list for future reuse. Memory Available The number of bytes in the original heap that have never been allocated. in Heap In Use High Water The maximum memory in use since the system last rebooted. Mark The following shows example CLI display output for the command. (netgear switch) #show routing heap summary Heap Size 92594000 bytes Memory In Use 149598 bytes (0%) Memory on Free List 78721 bytes (0%) Memory Available in Heap........ 92365249 bytes (99%) In Use High Water Mark.......... 210788 bytes (0%) Router Discovery Protocol Commands This section describes the commands you use to view and configure Router Discovery Protocol settings on the switch. The Router Discovery Protocol enables a host to discover the IP address of routers on the subnet. ip irdp This command enables Router Discovery on an interface. Default Format Mode disabled ip irdp Interface Config no ip irdp This command disables Router Discovery on an interface. Format Mode no ip irdp Interface Config Routing Commands 263