Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 700

ProSafe Managed Switch show radius Use this command to display the values configured for the global parameters of the RADIUS client. Format Mode show radius Privileged EXEC Term Definition Number of Configured Authentication Servers The number of RADIUS Authentication servers that have been configured. Number of Configured Accounting Servers The number of RADIUS Accounting servers that have been configured. Number of Named Authentication Server Groups The number of configured named RADIUS server groups. Number of Named Accounting Server Groups The number of configured named RADIUS server groups. Number of Retransmits The configured value of the maximum number of times a request packet is retransmitted. Time Duration The configured timeout value, in seconds, for request re-transmissions. RADIUS Accounting Mode A global parameter to indicate whether the accounting mode for all the servers is enabled or not. RADIUS Attribute 4 Mode A global parameter to indicate whether the NAS-IP-Address attribute has been enabled to use in RADIUS requests. RADIUS Attribute 4 Value A global parameter that specifies the IP address to be used in the NAS-IP-Address attribute to be used in RADIUS requests. The following shows example CLI display output for the command. (Switch)#show radius Number of Configured Authentication Servers 32 Number of Configured Accounting Servers 32 Number of Named Authentication Server Groups 15 Number of Named Accounting Server Groups 3 Number of Retransmits 4 Time Duration 10 RADIUS Accounting Mode Disable RADIUS Attribute 4 Mode Enable RADIUS Attribute 4 Value 192.168.37.60 Management Commands 700