Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 694
RADIUS Commands, authorization network radius, radius accounting mode, radius server attribute
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 694 highlights
ProSafe Managed Switch RADIUS Commands This section describes the commands you use to configure the switch to use a Remote Authentication Dial-In User Service (RADIUS) server on your network for authentication and accounting. authorization network radius Use this command to enable the switch to accept VLAN assignment by the radius server. Default Format Mode disable authorization network radius Global Config no authorization network radius Use this command to disable the switch to accept VLAN assignment by the radius server. Format Mode no authorization network radius Global Config radius accounting mode Use this command to enable the RADIUS accounting function. Default Format Mode disabled radius accounting mode Global Config no radius accounting mode Use this command to set the RADIUS accounting function to the default value (disabled). Format Mode no radius accounting mode Global Config radius server attribute Use this command to specify the RADIUS client to use the NAS-IP Address attribute in the RADIUS requests. If the specific IP address is configured while enabling this attribute, the Management Commands 694