Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 136
port-channel name, no port-channel load-balance
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
ProSafe Managed Switch Term Definition 1 Source MAC, VLAN, EtherType, and incoming port associated with the packet 2 Destination MAC, VLAN, EtherType, and incoming port associated with the packet 3 Source/Destination MAC, VLAN, EtherType, and incoming port associated with the packet 4 Source IP and Source TCP/UDP fields of the packet 5 Destination IP and Destination TCP/UDP Port fields of the packet 6 Source/Destination IP and source/destination TCP/UDP Port fields of the packet 7 Enhanced Hashing Mode | all Global Config Mode only: The interface is a logical unit/slot/port number of a configured port-channel. "All" applies the command to all currently configured port-channels. no port-channel load-balance This command reverts to the default load balancing configuration. Format Mode no port-channel load-balance { | } Interface Config Global Config Term | all Definition Global Config Mode only: The interface is a logical unit/slot/port number of a configured port-channel. "All" applies the command to all currently configured port-channels. port-channel name This command defines a name for the port-channel (LAG). The interface is a logical unit/slot/port for a configured port-channel, and is an alphanumeric string up to 15 characters. Format Mode port-channel name { | } Global Config Switching Commands 136