Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 575

ProSafe Managed Switch Mean Time (GMT). This may not be the time zone in which the switch is located. Use the clock timezone command to configure a time zone specifying the number of hours and optionally the number of minutes difference from UTC. To set the switch clock to UTC, use the no form of the command. Format Mode Default clock timezone zone-name +/-hours-offset [+/-minutes-offset] Global Config no clock timezone Term zone-name hours-offset minutes-offset Definition A name to associate with the time zone Number of hours difference with UTC Number of minutes difference with UTC no clock timezone This command sets the switch to UTC time. Format Mode no clock timezone Global Config clock set This command sets the system time and date. Format Mode clock set clock set Global Config clock summer-time recurring Use the clock summer-time recurring command to set the summertime offset to UTC recursively every year. If the optional parameters are not specified, they are read as either '0' or '\0', as appropriate. Use the following parameters to configure the summer-time. • USA-the US Daylight saving time setting is used (Start --- March, 2nd sunday 02:00 AM, End --- Nov, 1st sunday, 2:00 AM) • EU-the European Union Daylight savings time is used (Start --- March, 5th Sunday 02:00 AM, End --- October, 5th Sunday, 3:00 AM) • week-Week of the month. (Range: 1-5, first, last) • day-Day of the week. (Range: The first three letters by name; sun, for example.) • month-Month. (Range: The first three letters by name; jan, for example.) Utility Commands 575