Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 32

ProSafe Managed Switch Format Mode nsf Stack Global Config no nsf This command disables non-stop forwarding on the stack. Format Mode no nsf Stack Global Config show nsf This command displays global and per-unit information on NSF configuration on the stack. Format Mode show nsf Privileged EXEC Term Definition NSF Administrative Status Whether nonstop forwarding is administratively enabled or disabled. Default: Enabled NSF Operational Status Indicates whether NSF is enabled on the stack. Last Startup Reason The type of activation that caused the software to start the last time: • "Power-On" means that the switch rebooted. This could have been caused by a power cycle or an administrative "Reload" command. • "Administrative Move" means that the administrator issued the movemanagement command for the stand-by manager to take over. • "Warm-Auto-Restart" means that the primary management card restarted due to a failure, and the system executed a nonstop forwarding failover. • "Cold-Auto-Restart" means that the system switched from the active manager to the backup manager and was unable to maintain user data traffic. This is usually caused by multiple failures occurring close together. Time Since Last Restart Time The time since the current management unit became the active management unit. Restart in progress Whether a restart is in progress. Warm Restart Ready Whether the system is ready to perform a nonstop forwarding failover from the management unit to the backup unit. Copy of Running Configuration to Backup Unit: Status Whether the running configuration on the backup unit includes all changes made on the management unit. Displays as Current or Stale. Stacking Commands 32