Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 353
ip pim bsr-border, ip pim bsr-candidate, no ip pim sparseGlobal Config
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 353 highlights
ProSafe Managed Switch no ip pim sparse(Global Config) This command is used to administratively disable PIM-SM multicast routing mode on the router. Format Mode no ip pim sparse Global Config ip pim bsr-border Use this command to prevent bootstrap router (BSR) messages from being sent or received through an interface. Default Format Mode disabled ip pim bsr-border Interface Config no ip pim bsr-border Use this command to disable the interface from being the BSR border. Format Mode no ip pim bsr-border Interface Config ip pim bsr-candidate This command is used to configure the router to announce its candidacy as a bootstrap router (BSR). Format Mode ip pim bsr-candidate interface [vlan | ] [interval ] Global Config Parameters hash-mask length bar-priority interval Description Length of a mask (32 bits maximum) that is to be ANDed with the group address before the hash function is called. All groups with the same seed hash correspond to the same RP. For example, if this value was 24, only the first 24 bits of the group addresses matter. This allows you to get one RP for multiple groups. Priority of the candidate BSR. The range is an integer from 0 to 255. The BSR with the larger priority is preferred. If the priority values are the same, the router with the larger IP address is the BSR. The default value is 0. The C-BSR advertisement interval. If the interval values are reduced from the default value of 60 seconds, there could be issues in the network (especially BSR) due to flooding of these packets. However, it will provide RP fast failover. IP Multicast Commands 353