Yamaha DM2000 Owner's Manual - Page 104

90 Chapter 10-Aux Sends Muting Aux Sends (ON/OFF) 1 Use the LAYER buttons to select the Input Channel Layers, and use the [SEL] buttons to select the Input Channels. 2 Use the SELECTED CHANNEL AUX/MATRIX SEND [BANK] button to select Aux 1-4, Aux 5-8, or Aux 9-12. 3 Use the SELECTED CHANNEL AUX/MATRIX SEND [ON] buttons to turn the Aux Sends of the selected Input Channel on or off. AUX / MATRIX SEND DISPLAY LEVEL LEVEL LEVEL LEVEL BANK ON AUX 1 / MATRIX 1 AUX 5 AUX 9 ON AUX 2 / MATRIX 2 AUX 6 AUX 10 ON AUX 3 / MATRIX 3 AUX 7 AUX 11 ON AUX 4 / MATRIX 4 AUX 8 AUX 12 Aux Send Pages You can view and set the Aux Send parameters of all Input Channels on the Aux Send pages. Operation of the Aux Send pages in Variable and Fixed mode is explained separately. Variable Mode See page 88 for information on how to select Variable Aux mode. 1 Use the AUX SELECT [DISPLAY] button to select the Aux Send pages. The Aux Send parameters for the 96 Input Channels are divided among four pages. The Input Channel 1-24 Aux Send page in Variable mode is shown below. The layout of the other three pages is the same. 2 Use the AUX SELECT [1-12] buttons to select Aux Sends 1-12. 3 Use the cursor buttons to select the Input Channel Aux Send controls. Input Channels can also be selected by using the Input Channel Layer buttons and [SEL] buttons. 4 To turn Aux Sends on and off, select the rotary controls, and press [ENTER]. The rotary controls of Aux Sends that are turned off, appear gray, and "OFF" appears in place of the level value. Aux Send levels can still be changed even when Aux Sends are off. DM2000-Owner's Manual