Yamaha DM2000 Owner's Manual - Page 229
Automation, Viewing the Automation Mode
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Automation 215 Automation Viewing the Automation Mode The Automation mode setting of each channel can be viewed as follows. 1 Press and hold a channel's [AUTO] button. The channel's Automation mode is displayed on the corresponding channel strip display while the [AUTO] button is pressed. Pro Tools Auto write Auto touch Auto latch Auto read Auto off Channel Strip Displays Wrt Tch Ltch Read Off [AUTO] Button Indicators Flashing red (Record Ready) Red (Recording) Green Off The Automation mode settings of all channels can be viewed as follows. 2 Press and hold the AUTOMIX [DISPLAY] (AUTO STATUS) button. The Automation modes of all channels are displayed on the channel strip displays while the AUTOMIX [DISPLAY] (AUTO STATUS) button is pressed. Setting the Automation Mode The Automation mode can be set as follows. 1 While holding down a channel's [AUTO] button, press the AUTOMIX [WRITE], [TOUCH], [LATCH], [TRIM], [READ], or [OFF] button. The channel's Automation mode is displayed on the corresponding channel strip display while the [AUTO] button is pressed. Grouped channels are set together. You can temporarily disable a group in order to set individual channels by pressing and holding the USER DEFINED KEYS [12] (CTRL/CLUTCH) button. The following shortcuts apply. To do this... Do this! Set the Automation mode of all channels Set the Automation mode of all selected channels USER DEFINED KEYS [5]+AUTOMIX [WRITE], [TOUCH], [LATCH], [TRIM], [READ], or [OFF] USER DEFINED KEYS [5]+USER DEFINED KEYS [4]+AUTOMIX [WRITE], [TOUCH], [LATCH], [TRIM], [READ], or [OFF] DM2000-Owner's Manual