Yamaha DM2000 Owner's Manual - Page 96
Stereo Out, Stereo Out Connectors, Patching the Stereo Out to Outputs, Routing Input Channels
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
82 Chapter 8-Stereo Out 8 Stereo Out Stereo Out Connectors The Stereo Out is output by the STEREO OUT +4 dB (BAL) balanced XLR-3-32-type connectors and the STEREO OUT -10 dBV (UNBAL) unbalanced phono connectors. Patching the Stereo Out to Outputs The left and right channels of the Stereo Out can be patched to the Slot Outputs, Omni Outs, or the 2TR Digital Outputs. See "Output Patching" on page 63 for more information. Routing Input Channels to the Stereo Out Input Channels can be routed and panned to the Stereo Out. See "Routing Input Channels" on page 75 for more information. Sending Bus Outs to the Stereo Out Bus Out signals can be sent to the Stereo Out. See "Sending Bus Outs to the Stereo Out" on page 87 for more information. Metering the Stereo Out Stereo Out signal levels can be metered on the Meter pages. See "Metering" on page 103 for more information. Monitoring the Stereo Out The Stereo Out can be monitored via the LARGE and SMALL CONTROL ROOM MONITOR OUTs and the PHONES (see page 132) or the STUDIO MONITOR OUT (see page 133). Attenuating the Stereo Out Stereo Out signals can be attenuated pre-EQ. See "Attenuating Signals" on page 106 for more information. EQ'ing the Stereo Out The Stereo Out features 4-band parametric EQ. See "Using EQ" on page 107 for more information. Grouping Master EQs The Stereo Out EQ can be grouped with the EQs of other Output Channels. See "Grouping Output Channel EQs" on page 110 for more information. Stereo Out Inserts Internal effects processors and external signal processors can be patched into the Stereo Out by using the Inserts. See "Using Inserts" on page 111 for more information. DM2000-Owner's Manual