Yamaha DM2000 Owner's Manual - Page 74
Attenuating Cascade Inputs, Turning On & Off Cascade Outputs, CASCADE IN ATTENUATOR
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
60 Chapter 5-Digital I/O & Cascading Attenuating Cascade Inputs Cascade Inputs can be attenuated, and the Cascade mode and Cascade source can be specified on the Cascade In page. 1 Use the DISPLAY ACCESS [DIO] button to locate the Cascade In page. 2 Use the cursor buttons to select the parameters, and use the Parameter wheel, INC/DEC buttons, or [ENTER] button to set them. CASCADE MODE: When you want to output the same signals from two DM2000s, turn on the BI-DIRECTIONAL button. In this case, the Cascade connections are looped. Turn on the CASCADE MASTER option on one of the DM2000s to make it the master console. When the BI-DIRECTIONAL button is off, the last DM2000 in the cascade is automatically configured as the master console and it output the final signals. CASCADE IN FROM: This is used to specify the type of device connected to the CASCADE IN port, either DM2000 or 02R. When a DM2000 is connected to the CASCADE IN port, DM2000 is specified automatically. CASCADE IN ATTENUATOR: These controls are used to attenuate Cascade Input signals. You can copy the currently selected setting to all Attenuator parameters by double-clicking the [ENTER] button. Turning On & Off Cascade Outputs Individual Cascade Outputs can be turned on or off as follows. 1 Use the DISPLAY ACCESS [DIO] button to locate the Cascade Out page. 2 Use the cursor buttons to select the ON/OFF buttons, and use the [ENTER] button to set them. DM2000-Owner's Manual