Yamaha DM2000 Owner's Manual - Page 111
Matrix Sends, Patching Matrix Send Masters to Outputs, PreFader or PostFader Matrix Sends,
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
11 Matrix Sends Matrix Sends 97 Patching Matrix Send Masters to Outputs The left and right channels of the Matrix Send Masters can be patched to the Slot Outputs, Omni Outs, or the 2TR Digital Outputs. See "Output Patching" on page 63 for more information. Pre-Fader or Post-Fader Matrix Sends Matrix Sends can be configured globally as either pre-fader or post-fader on the Matrix View page. See "Viewing Matrix Send Settings" on page 99 for more information. Setting Matrix Send Levels Matrix Send levels can be set by using the SELECTED CHANNEL AUX/MATRIX SEND LEVEL controls, the faders, or the Encoders. Using the SELECTED CHANNEL AUX/MATRIX SEND LEVEL Controls 1 Use the LAYER [MASTER] button to select the Master Layer. 2 Use [SEL] buttons 1-20 to select the Bus Outs and Aux Sends, and use the STEREO [SEL] button to select the Stereo Out. The Matrix Sends for the left and right channels of the Stereo Out can be set individually. Use the STEREO [SEL] button to select the left and right channels. 3 Use the LEVEL controls to set the Matrix Send levels. AUX / MATRIX SEND DISPLAY LEVEL LEVEL LEVEL LEVEL BANK ON AUX 1 / MATRIX 1 AUX 5 AUX 9 ON AUX 2 / MATRIX 2 AUX 6 AUX 10 ON AUX 3 / MATRIX 3 AUX 7 AUX 11 ON AUX 4 / MATRIX 4 AUX 8 AUX 12 Using the Faders 10 0 Stereo Out Matrix Sends cannot be set using the faders. 1 Use the LAYER [MASTER] button to select the Master Layer. 5 5 0 10 5 15 2 Press the FADER MODE [AUX/MTRX] button to select the Aux/Mtrx 10 20 Fader mode. 15 30 3 Use the MATRIX SELECT [1-4] buttons to select Matrix Sends 1-4. 20 40 4 Use faders 1-20 to set the Matrix Send levels. 30 50 40 60 50 70 Faders 21-24 are inactive because Matrix Send Masters do not feature Matrix Send controls. Refer to the legend on the left side of the faders when setting Matrix Send levels. Using the Encoders Stereo Out Matrix Sends cannot be set using the Encoders. 1 Press the LAYER [MASTER] button to select the Master Layer. 2 Press the ENCODER MODE [AUX/MTRX] button to select the Aux/Mtrx Encoder mode. DM2000-Owner's Manual