Yamaha DM2000 Owner's Manual - Page 201

Using Bulk Dump 187 Using Bulk Dump DM2000 data can be stored to an external MIDI device, such as a MIDI data filer, by using MIDI Bulk Dump. 1 Use the DISPLAY ACCESS [MIDI] button to locate the Bulk Dump page. 2 To transmit data, use the CATEGORY parameters to select the type of data you want to transmit, select the TRANSMIT button, and then press [ENTER]. 3 To receive data, use the CATEGORY parameters to select the type of data you want to receive, select the REQUEST button, and then press [ENTER]. The INTERVAL parameter sets the interval between data packets during transmission. The CATEGORY parameters can be set as follows: ALL: All data. SCENE MEM: ALL Scenes, individual Scenes, or current (i.e., the Edit buffer). AUTOMIX: ALL Automixes, individual Automixes, or the current Automix. LIBRARY: The following libraries: EQ, Gate, Comp, Channel, Effects, GEQ, Bus to Stereo, Input Patch, Output Patch, Surround Monitor. For each library you can specify ALL user memories, individual user memories, and for the Bus to Stereo, Input Patch, Output Patch, Surround Monitor libraries you can also specify the current settings. BANK: User Defined Remote Layer banks, User Defined Plug-Ins banks, or the User Defined Keys banks. For each item you can specify ALL or individual banks. SETUP MEM: DM2000 setup data (i.e., system settings). PGM TABLE: Scene to MIDI Program Change table. See "Assigning Scenes to Program Changes" on page 185. CTL TABLE: Parameter to MIDI Control Change table. See "Assigning Parameters to Control Changes" on page 186. PLUG-IN: The settings of any installed Y56K cards. You can specify ALL Slots or Slots 4-6 individually. DM2000-Owner's Manual