Yamaha DM2000 Owner's Manual - Page 151

Surround Monitoring 137 MONITOR ALIGNMENT ATT & DLY ON/OFF: These buttons are used to turn on and off the Monitor Alignment Attenuator and Delay parameters of all Surround speakers. The MONITOR ALIGNMENT diagram and Surround Channel Attenuator and Delay parameters, which are displayed when either of these buttons are selected, allow you to align the surround monitor speakers by attenuating and delaying Surround Channels as necessary. The Attenuator parameters can be set from -12 dB to +12 dB in 0.1 dB steps. The Delay parameters can be set from 0.0 to 30.0 msec in 0.02 msec steps. Patching Slot Inputs to Surround Channels Individual Slot Inputs can be patched to Surround Monitor Channels as follows. 1 Use the MONITOR [DISPLAY] button to locate the Surround Monitor Patch page. 2 Use the cursor buttons to select the parameters, and use the Parameter wheel, INC/DEC buttons, and [ENTER] button to set them. SLOT/CH: This patching matrix is used to patch Inputs 1-8 from each of the six Slots to Surround Monitor Channels 1-8. Each Slot Input can be patched to only one Surround Monitor Channel. LEVEL: These parameters are used to set the monitor level of each Slot. DM2000-Owner's Manual