Yamaha DM2000 Owner's Manual - Page 120
Attenuating Signals, Using the SELECTED CHANNEL EQUALIZER ATT Control, Attenuator s
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
106 Chapter 12-Common Channel Functions Attenuating Signals Input Channels, Bus Outs, Aux Sends, Matrix Sends, and the Stereo Out all feature pre-EQ attenuation, which is useful for attenuating "hot" signals before EQ'ing. Using the SELECTED CHANNEL EQUALIZER ATT Control 1 Use the LAYER buttons to select Layers, and use the [SEL] buttons to select channels. 2 Use the ATT control to set the amount of attenuation. Attenuator Pages ATT. Attenuator settings can be viewed and set on the Attenuator pages. 1 Use the EQUALIZER [DISPLAY] button to select the Attenuator pages. The Attenuator parameters for the 96 Input Channels are arranged into four pages. The Input Channel 1-24 Attenuator/Shifter page is shown below. The layout of the other three pages is the same. The attenuator parameters for the Output Channels appear on the Output Attenuator page. 2 Use the cursor buttons to select the channels, and use the Parameter wheel or INC/DEC buttons to set the amount of attenuation. Input and Output Channels can also be selected by using the LAYER and [SEL] buttons. You can copy the currently selected Input or Output Channel attenuation setting to all Input or Output Channels respectively by double-clicking the [ENTER] button. For Input Channels, you can also set the amount of attenuation in bits from +2 bits to -24 bits. Use the cursor buttons to select the bit shift parameters, and use the Parameter wheel or INC/DEC buttons to set them. The rotary attenuators and the bit shift parameters can be set independently. DM2000-Owner's Manual