Yamaha DM2000 Owner's Manual - Page 253

Initializing the DM2000 239 Initializing the DM2000 The DM2000 can be initialized as follows. Warning: This procedure will clear all user memories and reset all settings to their initial values. You may want to back up any important data beforehand via MIDI Bulk Dump (see page 187), or to SmartMedia (see page 231). If you want to reset just the mix settings, recall scene memory #0 instead (see page 157). 1 Turn off the DM2000. 2 While holding down the SCENE MEMORY [STORE] button, turn on the DM2000. 3 When the confirmation message appears, release the SCENE MEMORY [STORE] button, select YES, and press [ENTER]. The following message is displayed while initialization is in progress: "Loading Factory Presets & Calibrating the Faders... Do Not Touch the Faders!" It's important that you do not touch the faders while this message is displayed, as the faders may not be calibrated correctly. The display returns to normal when initialization is complete. DM2000-Owner's Manual