Yamaha DM2000 Owner's Manual - Page 187

Rerecording Events 173 7 Start the timecode source. The AUTOMIX [REC] button indicator lights up continuously, and on the Automix Main and Memory pages, the REC and PLAY buttons appear highlighted. 8 Adjust the faders and other controls as necessary. Use the SELECTED CHANNEL section to edit the currently selected channel. Channels are selected automatically when the [AUTO] buttons are pressed. You can punch channels out of recording by using the [AUTO] buttons. 9 To stop Automix recording, stop the timecode source, or press the STOP button on the Automix Main or Memory page. A confirmation message appears asking if you want to update the existing Automix data (i.e., keep the edits just recorded). Rerecording Events Events can be rerecorded as many times as you like. Remember, however, that unlike the first pass, on subsequent passes, existing events for the currently punched in parameter are overwritten, so use the OVERWRITE buttons and [AUTO] buttons with care. Instead of using the [AUTO] buttons to punch in an entire channel, you can reduce the risk of overwriting important data by punching in and out individual parameters (see page 175). Use the Update To End option to determine how existing events are handled when rerecording is stopped (see page 165). Use the Edit Out (see page 166) and Fader Edit (see page 167) options to determine how Fader events are rerecorded. DM2000-Owner's Manual