Yamaha DM2000 Owner's Manual - Page 139
Viewing Channel Fader Settings, Output Channels
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Viewing Channel Fader Settings 125 Output Channels This is the Parameter View page for the Bus Outs, Aux Sends, Matrix Sends, and the Stereo Out. Parameters are the same as for the Input Channel Parameter View page, minus the GATE and Phase sections and the DELAY MIX and FB GAIN parameters. The parameter settings of the left and right channels of the Matrix Sends and Stereo Out can be viewed individually. Use the [SEL] buttons to toggle between the left and right channels. Viewing Channel Fader Settings The fader-related settings of the currently selected Input Channel, Bus Out, Aux Send, Matrix Send, or the Stereo Out can be viewed and set on the Fader View pages. 1 Use the DISPLAY ACCESS [VIEW] button to select the Fader View page. 2 Use the LAYER buttons to select Layers, and use the [SEL] buttons to select channels. 3 Use the cursor buttons to select the parameters, and use the Parameter wheel, INC/DEC buttons, and [ENTER] buttons to set them. Pan and Balance controls can be set to center by pressing [ENTER] while they're selected. Input Channels This is the Fader View page for the Input Channels. PAN: This is the currently selected Input Channel's Pan parameter. See "Panning Input Channels" on page 76 for more information. ON/OFF: This is the On/Off parameter of the currently selected Input Channel. See "Muting Input Channels (ON/OFF)" on page 72 for more information. Fader: This indicates the fader position of the currently selected Input Channel. The fader knob appears highlighted when the fader is set to 0.0 dB. The fader position is displayed DM2000-Owner's Manual