Yamaha DM2000 Owner's Manual - Page 98
Balancing the Stereo Out, Inserting GEQs, Viewing Stereo Out Settings
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
84 Chapter 8-Stereo Out Balancing the Stereo Out The left and right channels of the Stereo Out can be balanced as follows. 1 Press the STEREO [SEL] button to select the Stereo Out. PAN / SURROUND DISPLAY L ODD L R R EVEN 2 Use the Pan control to set the balance. The pan display indicates the balance. When the balance is set to center, the center two segments light up. Balance can be set to center by pressing [ENTER]. The Stereo Out balance can also be set on the Stereo Fader View page. See "Viewing Channel Fader Settings" on page 125 for more information. Delaying the Stereo Out The left and right channels of the Stereo Out can be delayed independently by using the Stereo Out Delay. See "Delaying Channel Signals" on page 117 for more information. Inserting GEQs Internal GEQs can be inserted into the left and right channels of the Stereo Out. See "About the GEQs" on page 155 for more information. Viewing Stereo Out Settings Parameter and fader settings for the Stereo Out can be viewed and set on the View pages. See "Viewing Channel Parameter Settings" on page 124 and "Viewing Channel Fader Settings" on page 125 for more information. Copying Stereo Out Settings Settings can be copied between the left and right channels of the Stereo Out by using the Channel Copy function. See "Copying Channel Settings" on page 129 for more information. Naming the Stereo Out The Stereo Out can be named for easy identification. See "Naming Channels" on page 130 for more information. DM2000-Owner's Manual