Yamaha DM2000 Owner's Manual - Page 222
Flip Mode, Press the FADER MODE [FADER] or [AUX/MTRX] button.
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
208 Chapter 19-Pro Tools Remote Layer Flip Mode In Flip mode, the faders, Encoders, and [ON] buttons can be used to control sends, as shown in the following table. Control Normal mode Flip mode Fader Encoder [ON] button Channel level Channel pan/send level Channel mute Send level Send pan Send mute 1 Press the FADER MODE [FADER] or [AUX/MTRX] button. The FADER MODE [FADER] and [AUX/MTRX] button indicators flash alternately, and both the ENCODER MODE [PAN] (PAN) and [AUX/MTRX] (SEND LEVEL) button indicators light up. The SELECT ASSIGN section of the display shows "FLIP." 2 Use the AUX SELECT [AUX 1-5] (SEND A-E) buttons to select the sends. The button indicator of the selected send lights up. 3 Use the faders, Encoders, and [ON] buttons to control the currently selected send. For stereo aux input channels (i.e., channels with two send panpots), use the ENCODER MODE [PAN] (PAN) button to toggle between the left and right panpots, and pan with the Encoder. When the left panpot is active, the ENCODER MODE [PAN] (PAN) button indicator is lit continuously. When the right panpot is active, the ENCODER MODE [PAN] (PAN) button indicator flashes. DM2000-Owner's Manual