Yamaha DM2000 Owner's Manual - Page 344

330 Appendix C: MIDI item. Effect is 0:Effect 1-7:Effect 8, GEQ is 0:GEQ1-5:GEQ6 If the store destination is 16383 (0x3FFF), this indicates that the library data has been changed by a external cause (i.e., loading from SmartMedia) (only transmitted by the DM2000) *2) This is also transmitted when a program that has not been assigned to the [Program change table] is recalled. (Normally this would be transmitted as a program change message.) 12.3.15 Parameter change (Function call: title) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, the title of the specified memory/library will be changed Transmission In response to a request, a Parameter Change message will be transmitted on the [Rx CH]. If [Parameter change ECHO] is ON, this message will be retransmitted without change. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 00000110 7F Universal ADDRESS 00010000 10 Function call Library 0100aaaa 4a Address UL (function) 0nnnnnnn nn Address LU (number H) 0nnnnnnn nn Address LL (number L) DATA 0ddddddd dd title 1 :: 0ddddddd dd title x(depend on the library) EOX 11110111 F7 End of exclusive function SCENE LIB TITLE EQ LIB TITLE GATE LIB TITLE COMP LIB TITLE EFF LIB TITLE GEQ LIB TITLE CHANNEL LIB TITLE INPATCH LIB TITLE OUTPATCH LIB TITLE Bus to Stereo LIB TITLE Surround Monitor LIB TITLE AUTOMIX LIB TITLE number size 0x40 0-99, 256(0:response 16 only) 0x41 1-200(1-40:response only) 16 0x42 1-128(1-4:response only) 16 0x43 1-128(1-36:response only) 16 0x44 1-128(1-52:response only) 16 0x45 0-128(0:response only) 16 0x46 0-128(0-1:response only) 16 0x47 0-32(0:response only) 16 0x48 0-32(0:response only) 16 0x49 0-32(0:response only) 16 0x4A 0-32(0:response only) 16 0x4B 1-16 16 12.3.16 Parameter request (Function call: title) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, a Parameter Change message will be transmitted on the [Rx CH]. Refer to the above table for the Functions and Numbers. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0011nnnn 3n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 00000110 7F Universal ADDRESS 00010000 10 Function call Library 0100aaaa 4a Address UL (function) 0nnnnnnn nn Address LU (number H) 0nnnnnnn nn Address LL (number L) EOX 11110111 F7 End of exclusive 12.3.17 Parameter change (Function call: Scene/Library Clear) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, the specified memory/library will be stored/recalled. Transmission If [Parameter change ECHO] is ON, this message will be retransmitted without change. STATUS ID No. SUB STATUS GROUP ID MODEL ID ADDRESS EOX 11110000 F0 01000011 43 0001nnnn 1n 00111110 3E 00000110 7F 00010000 10 0110aaaa 6a 0nnnnnnn nn 0nnnnnnn nn 11110111 F7 System exclusive message Manufacture's ID number (YAMAHA) n=0-15 (Device number=MIDI Channel) MODEL ID (digital mixer) Universal Function call Library Address UL (function) Address LU (number H) Address LL (number L) End of exclusive function SCENE LIB CLEAR EQ LIB CLEAR GATE LIB CLEAR COMP LIB CLEAR EFF LIB CLEAR GEQ LIB CLEAR CHANNEL LIB CLEAR INPATCH LIB CLEAR OUTPATCH LIB CLEAR Bus to Stereo LIB CLEAR Surround Monitor LIB CLEAR AUTOMIX LIB CLEAR 0x60 0x61 0x62 0x63 0x64 0x65 0x66 0x67 0x68 0x69 0x6A 0x6B number 1-99 41-200 5-128 37-128 1-128 0-128 2-128 0-32 0-32 0-32 0-32 1-16 12.3.18 Parameter change (Function call: pair, copy) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, pairing will be enabled/disabled for the specified channel. (Items other than PAIR are reserved for future use.) STATUS ID No. SUB STATUS GROUP ID MODEL ID ADDRESS DATA EOX 11110000 F0 01000011 43 0001nnnn 1n 00111110 3E 00000110 7F 00010001 11 0000aaaa 0a 0ddddddd dd 0ddddddd dd 0ddddddd dd 0ddddddd dd 11110111 F7 System exclusive message Manufacture's ID number (YAMAHA) n=0-15 (Device number=MIDI Channel) MODEL ID (digital mixer) Universal Function call Pair Function Source channel number H Source channel number L Destination channel number H Destination channel number L End of exclusive function PAIR ON with COPY PAIR ON with RESET BOTH PAIR OFF 0x00 0x01 0x02 Channel *1) *1) *1) *1)0:CH1 - 95:CH96, 128:BUS1 - 135:BUS8, 256:AUX1 267:AUX12, 384:MATRIX1L - 391:MATRIX4R, 512:STEREO L - 513:STEREO R Effect is 0:Effect 1-7:Effect 8, GEQ is 0:GEQ1-5:GEQ6 In the case of PAIR, you must specify channels for which pairing is possible. In the case of PAIR ON with COPY, you must specify Source Channel as the copy source, and Destination Channel as the copy destination. 12.3.19 Parameter change (Function call Event: Effect) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. DM2000-Owner's Manual