Yamaha DM2000 Owner's Manual - Page 58

44 Chapter 3-Operating Basics Auto Channel Select & Touch Sense Select While the Auto Channel Select preference is on (see page 235), channels can be selected by moving the corresponding fader or Encoder, or by turning on the corresponding [AUTO], [SOLO], or [ON] button. While the Touch Sense Select preference is on (see page 237), channels can be selected simply by touching the fader knobs. Selecting Fader Modes The exact function of each fader depends on the selected Layer and Fader mode. 1 Select a Layer, as explained on page 42. 2 Use the FADER MODE buttons to select a Fader mode. [FADER]: Channel faders control Input Channel levels or Output Channel master levels, depending on the selected Layer. FADER MODE [AUX/MTRX]: Channel faders control Aux or Matrix Send levels, depending on the selected Layer. FADER AUX/ MTRX The indicator of the currently selected FADER MODE button lights up. The following table shows the channel fader functions for each Layer and Fader mode. Layer 1-24 25-48 49-72 73-96 Master Remote 1-4 Fader Mode Fader Aux/Mtrx Fader Aux/Mtrx Fader Aux/Mtrx Fader Aux/Mtrx Fader Aux/Mtrx Fader Aux/Mtrx Fader 1-8 9-16 17-20 21-24 Bus Out 1-8: master level Bus Out 1-8: Matrix Send level CH 1-24: level CH 1-24: Aux Send level CH 25-48: level CH 25-48: Aux Send level CH 49-72: level CH 49-72: Aux Send level CH 73-96 level CH 73-96: Aux Send level Aux Send 1-12: master level Aux Send 1-12: Matrix Send level Matrix Send 1-4: master level No operation: Faders fixed at -∞ Operation depends on the selected target. See "About Remote Layers" on page 217 for more information. DM2000-Owner's Manual