Yamaha DM2000 Owner's Manual - Page 289

Effects Parameters 275 DYNA. FLANGE Two input, two output dynamically controlled flanger. Parameter Range Description SOURCE SENSE DIR. DECAY OFFSET FB GAIN LSH F LSH G EQ F EQ G EQ Q HSH F HSH G INPUT, MIDI 0-100 UP, DOWN 1 0-100 -99 to +99% 21.2 Hz-8.00 kHz -12 to +12 dB 100 Hz-8.00 kHz -12 to +12 dB 10.0-0.10 50.0 Hz-16.0 kHz -12 to +12 dB Control source: input signal or MIDI Note On velocity Sensitivity Upward or downward frequency change Decay speed Delay time offset Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Low shelving filter frequency Low shelving filter gain EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth High shelving filter frequency High shelving filter gain 1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz), 3 ms-23.0 s (fs=88.2 kHz), 3 ms-21.1 s (fs=96 kHz) DYNA. PHASER Two input, two output dynamically controlled phaser. Parameter Range Description SOURCE SENSE DIR. DECAY OFFSET FB GAIN STAGE LSH F LSH G HSH F HSH G INPUT, MIDI Control source: input signal or MIDI Note On velocity 0-100 Sensitivity UP, DOWN Upward or downward frequency change 1 Decay speed 0-100 Lowest phase-shifted frequency offset -99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) 2, 4, 6, 8, 10, 12, 14, 16 Number of phase shift stages 21.2 Hz-8.00 kHz Low shelving filter frequency -12 to +12 dB Low shelving filter gain 50.0 Hz-16.0 kHz High shelving filter frequency -12 to +12 dB High shelving filter gain 1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz), 3 ms-23.0 s (fs=88.2 kHz), 3 ms-21.1 s (fs=96 kHz) DM2000-Owner's Manual