Yamaha DM2000 Owner's Manual - Page 325

Analog Input Spec 311 Analog Input Spec Input INPUT A/B 1-24 INSERT IN 1-24 2TR IN ANALOG 1 [L, R] 2TR IN ANALOG 2 [L, R] PAD GAIN Input level Actual Load For Use With Impedance Nominal Sensitivity1 Nominal Max. before clip Connector -60 dB 0 -16 dB 26 - - 3k Ω 10K Ω 10K Ω 50-600 Ω Mics & 600 Ω Lines -70 dB -60 dB (0.245 mV) (0.775 mV) -26 dB -16 dB (38.8 mV) (0.123 V) 0dB +10 dB (775 mV) (2.45 V) -46 dB (3.88 mV) -2 dB (616 mV) +24 dB (12.28 V) A: XLR-3-31 type (Balanced)2 B: Phone jack (TRS) (Balanced)3 600 Ω Lines -6dB (388 mV) +4 dB (1.23 V) +18 dB Phone jack (TRS) (6.16 V) (Balanced)3 600 Ω Lines +4 dB (1.23 V) +4 dB (1.23 V) +18 dB Phone jack (TRS) (6.16 V) (Balanced)3 - 10K Ω 600 Ω Lines -10 dBV (0.316 V) -10 dBV (0.316 V) +4 dBV Phono (1.58 V) (Unbalanced) 1. Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are maximum position.) 2. XLR-3-31 type connectors are balanced (1=GND, 2=HOT, 3=COLD). 3. Phone jacks are balanced (Tip=HOT, Ring=COLD, Sleeve=GND). In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms. For 2TR IN ANALOG 2 levels, 0 dBV is referenced to 1.00 Vrms. All input AD converters (except INSERT IN 1-24) are 24-bit linear, 128-times oversampling. +48 V DC (phantom power) is supplied to CH INPUT (1-24) XLR type connectors via individual switches. Analog Output Spec Output Actual Source Impedance For Use With Nominal GAIN SW1 Output level Nominal Max. before clip Connector STEREO OUT [L, R] 600 Ω 10k Ω Lines - 150 Ω 600 Ω Lines - STUDIO MONITOR OUT [L, R] 150 Ω 10k Ω Lines - C-R MONITOR OUT LARGE [L, R] 150 Ω 600 Ω Lines - -10 dBV (0.316 V) +4 dB (1.23 V) +4 dB (1.23 V) +4 dB (1.23 V) +4 dBV (1.58 V) +18 dB (6.16 V) +18 dB (6.16 V) +18 dB (6.16 V) Phono (Unbalanced) XLR-3-32 type (Balanced)2 Phone Jack (TRS) (Balanced)3 XLR-3-32 type (Balanced)2 C-R MONITOR OUT SMALL [L, R] 150 Ω 600 Ω Lines - +4 dB (1.23 V) +18 dB (6.16 V) XLR-3-32 type (Balanced)2 OMNI OUT 1-8 INSERT OUT 1-24 PHONES 150 Ω 150 Ω 100 Ω 10k Ω Lines +18 dB (default) +4 dB 10k Ω Lines - 8 Ω Phones - 40 Ω Phones - +4 dB (1.23 V) -10 dB (0.245 V) +4 dB (1.23 V) 4 mW 12 mW +18 dB (6.16 V) +4 dB (1.23 V) +18 dB (6.16 V) 25 mW 75 mW Phone Jack (TRS) (Balanced)3 Phone Jack (TRS) (Balanced)3 Stereo Phone Jack (TRS) (Unbalanced)4 1. The maximum output level of each OMNI OUT can be set internally. 2. XLR-3-32 type connectors are balanced (1=GND, 2=HOT, 3=COLD). 3. Phone jacks are balanced (Tip=HOT, Ring=COLD, Sleeve=GND). 4. PHONES stereo phone jack is unbalanced (Tip=LEFT, Ring=RIGHT, Sleeve=GND). STEREO OUT [L, R], 0 dBV is referenced to 1.00 Vrms. In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms. All output DA converters (except INSERT OUT 1-24) are 24-bit, 128-times oversampling. DM2000-Owner's Manual