Yamaha DM2000 Owner's Manual - Page 63

Stereo Out 49 AD Inserts AD Inputs feature switchable analog inserts with individual balanced 1/4-inch TRS phone jacks for the send and return signals. They are wired: sleeve-ground, ring-cold, tip-hot. The nominal signal level for both connectors is +4 dB. OFF ON INSERT AD Input inserts can be turned on and off individually by using the INSERT ON/OFF switches, so you don't have to disconnect your external equipment in order to remove an insert. Stereo Out See page 82 for information on the Stereo Out outputs. Control Room Monitor Outs See page 132 for information on the Control Room Monitor outputs. Studio Monitor Outs See page 133 for information on the Studio Monitor outputs. Omni Outs The DM2000 features assignable Omni Outs on balanced 1/4-inch TRS phone jacks. Omni Outs can be patched to Bus Outs, Aux Sends, Matrix Sends, the Stereo Out, Input or Output Channel Insert Outs, or Surround Monitor Channels (see page 64). In addition, Input Channel Direct Outs can be patched to the Omni Outs (see page 65). The maximum output level of each OMNI OUT can be set internally to either +4 dB (-10 dB operating level) or +18 dB (+4 dB operating level). Contact your dealer for further details. 2TR Analog INs The DM2000 features two sets of 2-track analog inputs: 2TR IN ANALOG 1 +4 dB (BAL) uses balanced 1/4-inch TRS phone jacks. 2TR IN ANALOG 2 -10 dBV (UNBAL) uses unbalanced phono jacks. These inputs can be monitored via the Control Room monitors by pressing the CONTROL ROOM [2TR A1] and [2TR A2] buttons. They can be patched to Input Channels (see page 61), Input Channel Insert Ins (see page 62), or Output Channel Insert Ins (see page 64). DM2000-Owner's Manual