Yamaha DM2000 Owner's Manual - Page 79
Patching Direct Outs, Patching the 2TR Digital Outputs
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Output Patching 65 Patching Direct Outs Direct Outs can be patched to the Slot Outputs, Omni Outs, or 2TR Digital Outputs. The Direct Out Destination parameters for the 96 Input Channels are divided between two pages. The Input Channel 1-48 Direct Out Destination page is shown below. The layout of the other page is the same. In addition to using the cursor buttons, Patch parameters can also be selected by using the [SEL] buttons. Patching the 2TR Digital Outputs Bus Outs, Aux Sends, Matrix Sends, the Stereo Out, Input or Output Channel Insert Outs, or the Control Room signal can be patched to the 2TR Digital Outputs. 2TR Digital Outputs can be patched to Direct Outs on the Direct Out Destination pages (see page 65). The left and right channels of each Digital Output can be patched individually. When a 2TR Digital Output is patched to a Direct out (see page 65), and that Direct Out is assigned on an Input Channel Routing page, the 2TR Digital Output patch cannot be changed here. DM2000-Owner's Manual