HP 8550dn HP Color LaserJet 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer - Use - Page 133
X = Description, Message, Recommended Action, XXXX ERROR, CYCLE POWER, X FUSER ERROR, LASER ERROR - firmware
UPC - 088698946428
View all HP 8550dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Message Description Recommended Action 49.XXXX ERROR CYCLE POWER Indicates that a firmware error has occurred, or corrupt data was sent to the printer. Verify that all cables are connected. Turn the printer off and on to reset the printer. If the condition persists, contact a local authorized HP dealer or service representative for service. 50.X FUSER ERROR CYCLE POWER Indicates that a fusing assembly malfunction has occurred. X = Description 1 = Low Temperature Error 2 = Warmup Error 3 = High Temperature Error 4 = Fuser Drive/Power Unit Error 6 = Heater Error Turn the printer off and on to reset the printer. For a 50.3 error, turn the printer off for 30 minutes to allow the fuser to cool, and then turn the printer on. If the condition persists, contact a local authorized HP dealer or service representative for service. 51 LASER ERROR CYCLE POWER Indicates that a laser malfunction has occurred. Turn the printer off and on to reset the printer. If the condition persists, contact a local authorized HP dealer or service representative for service. 52 SCANNER ERROR Indicates that the scanner CYCLE POWER motor is not turning properly. Turn the printer off and on to reset the printer. If the condition persists, contact a local authorized HP dealer or service representative for service. 132 7 Printer Control Panel Messages EN