HP 8550dn HP Color LaserJet 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer - Use - Page 146
Duplex Error, Check Duplexer, Eio N, Initializing, Not Functional, Engine Test, Face Up
UPC - 088698946428
View all HP 8550dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Message DUPLEX ERROR CHECK DUPLEXER EIO N INITIALIZING Description The printer has detected an error in the duplexer. An EIO accessory is initializing. Recommended Action Open the lower left door, press the green tab on the right side of the duplexer, and pull the duplexer out of the printer. Check for and remove any jammed media from the duplexer. Reinstall the duplexer. Turn the printer off and then on. If the problem persists, contact a local authorized HP dealer or service representative for service. No action is required. EIO N NOT FUNCTIONAL ENGINE TEST FACE UP OUTPUT BIN FULL N = EIO Slot Number 1 = Bottom EIO Slot 2 = Top EIO Slot Indicates an EIO card error. The error is logged to the event log with more detail. N = EIO Slot Number 1 = Bottom EIO Slot 2 = Top EIO Slot Turn the printer off and on to reset the printer. If the condition persists, replace the offending EIO accessory. The printer is running an internal test to verify operation. When the printer is finished, the printer returns to the ready state but remains offline. Press GO to bring the printer online. The top output bin (face up) Remove all media from the on the multi-bin mailbox is full. top output bin on the multi-bin mailbox to continue printing. EN Printer Messages 145