HP 8550dn HP Color LaserJet 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer - Use - Page 135
Temperature, Sensor Error, Cycle Power, 2 Carousel, Error, 3 Density, Printer Error, 1 Error
UPC - 088698946428
View all HP 8550dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Message Description Recommended Action 54.1 TEMPERATURE SENSOR ERROR CYCLE POWER Indicates that the humidity and temperature sensor in the printer has malfunctioned. Turn the printer off and on to reset the printer. If the condition persists, contact a local authorized HP service representative for service. Do not operate the printer in this condition or the printer can be damaged. 54.2 CAROUSEL ERROR CYCLE POWER Indicates that the color toner carousel is not working correctly. Open the color toner clear door and look for an obstruction. If the message does not clear after closing the doors, turn the printer off and on to reset the printer. If the condition persists, contact a local authorized HP dealer or service representative for service. 54.3 DENSITY SENSOR ERROR CYCLE POWER Indicates a density sensor error, or the printer is not receiving data back from the density sensor. Turn the printer off and on to reset the printer. If the condition persists, contact a local authorized HP dealer or service representative for service. 55 PRINTER ERROR CYCLE POWER Indicates a printer command error. The commands cannot be exchanged between the printer and its controller. Turn the printer off and on to reset the printer. If the condition persists, contact a local authorized HP dealer or service representative for service. 56.1 ERROR CYCLE POWER Indicates an input feed error (such as requesting to feed transparencies through the duplexer), or the input tray is not installed. If the input tray you are trying to print from is not installed, install the input tray. Turn the printer off and on to reset the printer. If the condition persists, contact a local authorized HP dealer or service representative for service. 134 7 Printer Control Panel Messages EN