HP 8550dn HP Color LaserJet 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer - Use - Page 158
Common, Printing Tasks
UPC - 088698946428
View all HP 8550dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Message TRAY 1 SIZE = TRAY 4 COMM ERROR CHECK CABLES AND CYCLE POWER TRAY X EMPTY TRAY X LIFTING Description This message is displayed when media is placed in tray 1. is the last media size configured for the input tray. Indicates a communication error between tray 4 and the printer. An input tray not currently selected has run out of media. X is the input tray number. is the last media type configured for the input tray. is the last media size configured for the input tray. The specified input tray is lifting the media into position for printing. Recommended Action Press -VALUE+ to view the choices. Press SELECT when the choice you want is displayed, and then press GO to bring the printer online. If no key is pressed for 30 seconds after the media is detected in the input tray, the displayed size will automatically be selected, the message will be cleared, and printing will begin. Verify that the communication and power cables are connected. Press GO to continue printing. If the message persists, turn the printer off and on to reset the printer. If the condition still persists, contact a local authorized HP dealer or service representative for service. Load the media type and size specified on the printer control panel display. For more information on loading media, see chapter 3, "Common Printing Tasks." No action is required. X is the input tray number. EN Printer Messages 157