Canon imagePROGRAF W8400 W8400 User's Guide - Page 109
pressing the slide holder release lever a., Move the slide holder to the left while
View all Canon imagePROGRAF W8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Using the Media Take-up Unit 3 Mount the 2 inch or 3 inch flange adaptor to the media take-up flange according to the size of the tube in the roll media to be spooled. z Mounting a 2 Inch Tube Mount flange adaptor L (a) on the left flange and flange adaptor R (b) on the right flange such that the corrugations in the holes are aligned with the flange grooves. b a c z Mounting a 3 Inch Tube Mount flange adaptor L (c) on the left flange and the flange adaptor R (d) on the right flange. Important z For both the 2 inch and 3 inch tubes, the flange adaptor with the spacer is located on the left side, and the flange adaptor without the spacer is on the right. Thoroughly check which adapters correspond to the left and right sides before mounting them. z If using adhesive media and the flange adaptor is dirty, wipe the dirt from the flange adaptor using a cloth. Continuing to use a dirty flange adaptor may cause defective spooling. 4 Move the slide holder to the left while pressing the slide holder release lever (a). g 5 Insert the tube into the spool holder axis. TOP Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu 2- 48 e d f Important z Make sure to use roll media for spooling that is the same size as the tube installed in the media take-up unit. Contents Index