Canon imagePROGRAF W8400 W8400 User's Guide - Page 369
Printing Halts During Print Job, When You Cannot Print
View all Canon imagePROGRAF W8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 369 highlights
When You Cannot Print Cause 5: The Media Type in the media source selection is not selected. Solution 1: Use the printer operation panel to select the correct setting for the media type. (→ P.2-34) Solution 2: If the Media Type selection is incorrect, cancel the print job in the computer side, open the printer driver and select the correct setting for the "print media loaded". (→ P.1-44, P.2-4) Cause 6: No ink. Solution 1: When the ink tank replacement message appears, replace the ink tank for the indicated color. (→ P.4-2) Ink initialization operation starts unexpectedly. Cause 1: When the printer was switched off previously, this force cancelled a cleaning operation. Solution 1: Wait for the ink initialization operation to finish. Ink filling may require up to 10 minutes to complete. Printing Halts During Print Job Error message is displayed. Cause 1: An error message is displayed during printing. Solution 1: Read the message displayed in the GARO Status Monitor or GARO Printmonitor, and correct the problem indicated by the error message. (→ P.6-2) Cause 2: Roll media ran out during the print job and the tape on the trailing edge of the media sheet is preventing the rest of the sheet from feeding. Solution 1: Follow the procedure for removing a media jam. Remove the used roll and replace it with a new one. (→ P.6-37) TOP Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents 6- 22 Index