Canon imagePROGRAF W8400 W8400 User's Guide - Page 340
Configuring the Computer for NetWare, Connecting to a NetWare Network, Installing the Printer Driver
View all Canon imagePROGRAF W8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
NetWare Settings (Windows) Configuring the Computer for NetWare Perform these settings on each computer after you have selected the NetWare print service and protocol. Connecting to a NetWare Network Install the NetWare client software on all computers that will perform printing, and the log onto either the NetWare server or the tree. Refer to the NetWare manual or the OS manual for the connection methods. Installing the Printer Driver To perform printing, the printer driver must be installed. Install the driver according to directions from your network administrator. When you install the printer driver, be sure to select Network printer and select the print queue that you created with the NetWare print service settings. Setting the Printer Port Select Settings and then Printers from the Start menu, and then select the printer icon. Next, select Properties from the File menu. Select the Advanced sheet or the Ports sheet, and then set the print queue that created the print destination port using the NetWare print service settings. (→ P.5-37) Note z This procedure is not required if you set the connection destination of the printer during the installation of the printer driver. 5- 44 トTッOPプ Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents Index