Canon imagePROGRAF W8400 W8400 User's Guide - Page 90

‹ Printing with Rolls Media „ Loading the Roll Media Load the roll media into the roll holder slot using the following procedure. If there are cut sheets or printed sheets still on the platen, remove them first. Important z If printing banners or other long sizes, the paper may reach the floor after printing and the printing surface become dirty. Wipe the floor beforehand using a clean cloth or paper. z If using roll media, wear clean cloth gloves when handling the media to protect the print surface. Note z The platen may be fouled with ink so clean inside the top cover before you switch to printing on a large size. (→ P.4-11) z For more details about media that can be loaded in the roll holder, please refer to "Media You Can Use". (→ P.2-2) 1 Open the top cover, and lift out the ejection guide. 2 If there is any roll media still present, rotate the top of the holder stopper towards the back, then rewind the media onto the roll and remove the roll holder. 3 Push the holder stopper lever (a) towards the outside to unlock the stopper, then pull out the holder stopper and remove the roll media. a 2- 29 Important z Do not touch any areas other than those indicated. Your hands could get dirty or this could damage the printer. Important z Store unused roll media in its original package. Store the package in a cool, dry location that is not exposed to direct sunlight. TOP Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents Index