Canon imagePROGRAF W8400 W8400 User's Guide - Page 359
Message Is Displayed, Check Bk/PC/C/PM/M/Y Ink Tank, Not Enough Ink, Ink level ?, ChangeBkInkType
View all Canon imagePROGRAF W8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 359 highlights
Message Is Displayed Check Bk/PC/C/PM/M/Y Ink Tank Cause 1: The ink tank indicated by the color on the display cannot be used with this printer, or an empty tank was installed. Not Enough Ink Cause 1: You cannot execute Head Cleaning B, print, or use any other function that uses ink because the remaining ink level is low. Solution 1: Install correctly the ink tank of the color named in the message. (→ P.4-2) Important z The ink may mix if you install an incorrect ink tank. If the color is incorrect as a result of installing the wrong ink tank, or if the images are very poor quality, and the Bk tank was mistakenly installed, perform the ChangeBkInkType operation (→ P.4-48). If you mistakenly installed any other ink cartridge, perform the Move Printer operation, and then install new ink tanks. (→ P.4-33) Cause 2: A problem has occurred with the ink tank indicated on the display. Solution 1: Replace with a new ink tank. (→ P.4-2) Solution 1: Replace the ink tank where the ink level is low. (→ P.4-2) Ink level ? Cause 1: The ink level detection function is turned OFF. Solution 1: Every time printing is performed, this message is displayed and the printer goes offline. Press the Online button to continue printing. Solution 2: To retrieve the ink level display, replace with the ink tanks specified for use with this printer. TOP Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents 6- 12 Index