Canon imagePROGRAF W8400 W8400 User's Guide - Page 91

‹ Printing with Rolls Media 4 Place the roll media end at the bottom, and insert the shaft of the roll holder firmly into the roll from the right side until the holder meets the roll. 5 Attach the holder stopper to the left side of the roll holder and insert it until it contacts the roll media shaft, then push the holder stopper lever (a) over toward the shaft to lock it. Caution z Place the roll holder horizontally on a table, and then load the roll holder. The roll media is heavy, so dropping it may cause an injury. Important z If the edge of the roll paper is not straight, take up the roll paper until the edge is straight before loading it. Misalignment of the edges may cause poor paper feed. a The roll media is locked in place by the roll holder. Important z If the edge of the roll paper is not straight, or there is blot or imprint of a tape. This could cause poor paper feed and reduce printing quality. In these cases, cut the edge of the roll media before loading the roll holder to the printer. z Firmly insert the roll holder into the shaft. Any gaps may cause poor paper feed. TOP Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents 2- 30 Index