Canon imagePROGRAF W8400 W8400 User's Guide - Page 310
Default G/W, Online, Store Setting, Stop/Eject, Storing - review
View all Canon imagePROGRAF W8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 310 highlights
TCP/IP Network Settings (Windows, Macintosh, UNIX) 13 Press the [ ] button once, and then press the [ ] or [ ] button to select Default G/W, and then press the [ ] button. IP Setting Default G/W ↓ 14 Press [ ] or [ ] to select the number within default gateway to change, then press OK button. Default G/W =0.0.0.0 15 Press [ ] or [ ] to change the number to the IP address of the default gateway, then press OK button. Each time you press the [ ] button the number increases by 1. The next number after 255 is 0. Each time you press the [ ] button the number decreases by 1. The next number after 0 is 255. Default G/W =XXX.0.0.0 16 Repeat Step 14 and 15 to enter the IP address of the default gateway. Finally, you need to save the IP address, subnet mask, and default gateway settings. 17 Press the Online button. 5- 14 Default G/W =XXX.XXX.XXX.XXX Store Setting is displayed. 18 Press the OK button. If you want to abort the settings, press Stop/Eject button. Store Setting Ok? The message Storing appears on the display and then the printer is restarted. When finished, the printer returns Online. If an error message is displayed, review the values of each of the settings, and correct the settings. Important z If you change the IP address, subnet mask, or default gateway, make sure you save the settings using Step 18. If the settings are not saved, the entered values will not be enabled. トTッOPプ Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents Index