Canon imagePROGRAF W8400 W8400 User's Guide - Page 252
Online, Rep. Ink Tank, EXXXX error, No X Ink Tank, To replace another ink tank color, repeat - error codes
View all Canon imagePROGRAF W8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
Replacing Ink Tanks 6 Insert the ink tank into the holder with the ink supply port facing down and the color label facing the rear. Bk Bk 9 When the ink tank has been replaced, press the center of the right back cover until it locks into place, and then close the right back cover. Important z The ink tanks are shaped so that the cover will not close if you install the wrong color ink tank. If the ink tank cover does not close, confirm that the color label on the holder matches the color of the ink tank. 7 Close the ink tank cover until you hear it click. The printer returns to Online or Offline mode. Printing restarts if the Rep. Ink Tank message was displayed in the middle of a print job. Important z If an ink tank has not been installed, EXXXX (error code) will be displayed on the top line of the display, and No X Ink Tank will be displayed on the bottom line. Go to Step 2 to correct this problem and make sure that all the color ink tanks are installed. z If the right back cover cannot be completely closed, one of the ink tank covers may not be completely closed. Check that all the ink tank covers were completely closed during Step 7. TOP Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu 8 To replace another ink tank color, repeat Step 3 to 7. 4- 7 Contents Index