Canon imagePROGRAF W8400 W8400 User's Guide - Page 343
Initializing the Network Settings, Location, Address, Enter, Administrator Mode, Logon, Device Manager
View all Canon imagePROGRAF W8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 343 highlights
Initializing the Network Settings Initializing the Network Settings Follow the procedure below to use the Web browser (Remote UI) to restore all the network settings to the factory default settings. Note z In addition to using the Web browser to restore the default settings, you can also use GARO Device Setup Utility or the printer operation panel to restore the default network settings. 1 Start the Web Browser and enter the following URL in the Location or Address box, then press the Enter key. http:// / Sample: http://XXX.XXX.XXX.XXX/ 2 Select Administrator Mode and then click the Logon button. When Remote UI is started with the network card set to the factory default settings, the English screen will be displayed. Set Language to Japanese, select Administrator Mode, and then press the Logon button. Remote UI starts. 5- 47 Note z If a password has been setup on the printer, enter the password and then press the OK button. If a password has not been setup, you do not need to enter a password. 3 From the Device Manager menu on the left, select Network. 4 Click the Reset to Default Settings button. 5 Verify the message then click the OK button. All network information is restored to the default settings. Note z When you initialize the network settings, the printer IP address setting is changed to the factory default value of (0.0.0.0), so the remote UI screen is not displayed again in the browser. Set it through GARO Device Setup Utility or printer operation panel if you set the network settings. トTッOPプ Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents Index