Canon imagePROGRAF W8400 W8400 User's Guide - Page 352

‹ Message Is Displayed End of Roll Cause 1: The roll media has run out. RllMed.Shortage Replace RllMed Cause 1: Data received is to print a size longer than the remaining roll media. Solution 1: Do the procedure below to load the same size and type of roll media in use. (→ P.2-28) 1. Load size and type of roll in use. 2. Select the media type. 3. Select length if the media remaining detection feature for roll media is ON. 4. Press the OK button. Solution 1: Load new roll media to the printer using the following procedure. (→ P.2-28) 1. Load a new roll media of the same size and type of roll in use. 2. Select the media type. 3. Select length if the media remaining detection feature for roll media is ON. 4. Press the OK button. Solution 2: Press and hold the Stop/Eject button for at least 1 second to stop printing. TOP Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents 6- 5 Index