Canon imagePROGRAF W8400 W8400 User's Guide - Page 24

‹ Function Menus Menu Item Far End RollMrgn Media Thickness VacuumStrngth Standard Cutter Cut speed CutDustReduct. Correct Smear 1- 21 Setting Values 10 mm, 5 mm Thick, Standard, Thin Weak, Standard, Strong, Strongest Enable, Disable Standard, Fast Off*, On Off*, On Function Sets the margin to reserve at the trailing edge of roll media to ensure printing quality is maintained at the trailing edge. Important z If set to 5 mm, the print quality at the trailing edge, or the accuracy of feeding, may deteriorate, or the surface of the print may be scratched. Ink may also adhere to the trailing edge of the media. Selects the ideal thickness for the media type. The printhead alert will display based on the value of this setting. Sets the amount of suction on the media on the platen. Determines whether the standard, flat blade cutter is enabled. Sets the speed of the cutter cutting the media. For media such as film that has a tendency to produce debris, select Fast to reduce the amount of debris produced. This item is enabled for the standard cutter only. A line is printed at the cut line in order to reduce the amount of dust generated by film and other media during cutting. Use this setting to correct the printing problems if the media appears to smear easily. TOP Chapter 1 Basic Use Chapter 2 Using Various Media Chapter 3 Printing by Objective Chapter 4 Maintenance Chapter 5 Using the Printer in a Network Environment Chapter 6 Troubleshooting Chapter 7 Operating the Function Menu Contents Index