Garmin G2000 Pilots Guide - Page 133

SyStem oVerVieW fligHt inStrUmentS eiS engine indication SyStem fUel calcUlationS Screen note: Fuel calculations do not use the aircraft fuel quantity indicators and are calculated from the last time the fuel totalizer quantity was reset. The system calculates Fuel used (GAL USED), endurance (ENDUR), and range (RANGE NM) based on the displayed fuel remaining (GAL REM), fuel flow, and groundspeed. The fuel remaining can be adjusted on the Fuel Calc Screen on the Touchscreen Controller. accessing the Fuel calculations Screen: From home, touch aircraft Systems > Fuel calc. adjusting the Totalizer-Based Fuel Remaining: 1) From home, touch aircraft Systems > Fuel calc. 2) Touch the Gal Rem Button. 3) Enter the fuel quantity using the numeric keypad or large and small right knobs, then touch the Enter Button. The totalizer-based fuel remaining is set to the entered fuel quantity and the GAL USED is set to zero. Setting the Totalizer-Based Fuel Remaining to Full Fuel: 1) From the home, touch aircraft Systems > Fuel calc. 2) Touch the Set To Full Fuel Button. The totalizer-based fuel remaining is set to the aircraft's usable fuel capacity and the GAL USED is set to zero. aUdio panel & cnS fligHt management aVoidance HaZard afcS additional featUreS appendiceS Fuel Remaining Fuel Used Calculation Range Calculation Endurance Calculation Edit Remaining Fuel Quantity Set Fuel Quantity to Full Figure 3-22 Fuel calculations Screen 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the cessna T240 119 indeX