Garmin G2000 Pilots Guide - Page 62

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AAUUDDI&IOOCPN&ASCNENLS System Overview Alerts for the following airspaces can be turned enabled/disabled: • Class B/TMA • Restricted • Class C/TCA • MOA (Military) • Class D • Other airspaces/ADIZ An altitude buffer is also provided which "expands" the vertical range above or below an airspace. For example, if the buffer is set at 500 feet, and the aircraft is more than 500 feet above/below an airspace, an alert message is not generated, but if the aircraft is less than 500 feet above/below an airspace and projected to enter it, the pilot is notified with an alert message. The default setting for the altitude buffer is 200 feet. Setting the altitude buffer distance: 1) From the Home, touch Utilities > Setup > Avionics Settings. 2) If necessary, touch the Alerts Tab. 3) Touch the Airspace Alert Alt Buffer altitude button (displays current selection in light blue). 4) Enter the desired altitude buffer using the numeric keypad or the large and small right knobs, then touch the ENTER Button or press the Right Knob. Enabling/disabling an airspace alert: 1) From the Home, touch Utilities > Setup > Avionics Settings. 2) If necessary, touch the Alerts Tab. 3) Scroll as necessary and touch the Enable Button nex to any of the following alerts: CLASS B/TMA, CLASS C/ TCA, CLASS D, RESTRICTED, MOA (MILITARY), OTHER/ADIZ. Button annunciator is green when alert is enabled, gray when disabled. MFD Fields Settings • MFD Data Bar Field 1 • MFD Data Bar Field 2 • MFD Data Bar Field 3 • MFD Data Bar Field 4 • MFD Data Bar Field 5 • MFD Data Bar Field 6 • MFD Data Bar Field 7 • MFD Data Bar Field 8 FLIGHT MANAGEMENT HAZARD AVOIDANCE AFCS ADDITIONAL FEATURES APPENDICES INDEX 48 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A