Garmin G2000 Pilots Guide - Page 84

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS Flight Instruments The barometric pressure setting is displayed below the Altimeter in inches of mercury (in Hg) or hectopascals (hPa) when metric units are selected. Adjusting the altimeter barometric setting creates discontinuities in VNV vertical deviation, moving the descent path. For large adjustments, it may take several minutes for the aircraft to re-establish on the descent path. If the change is made while nearing a waypoint with a VNV Target Altitude, the aircraft may not re-establish on the descent path in time to meet the vertical constraint. Selecting the altimeter barometric pressure setting: Turn the BARO Knob to select the desired setting. Selecting standard barometric pressure:  Press the BARO Knob to select standard pressure; STD BARO is displayed in the Barometric Setting box. Figure 2-11 Standard Barometric Altimeter Setting Changing altimeter barometric pressure setting units: 1) Select the PFD Settings Softkey to display the second-level softkeys. 2) Select the Altitude Units Softkey. 3) Select the IN Softkey to display the barometric pressure setting in inches of mercury (in Hg). Or, select the HPA Softkey to display the barometric pressure setting in hectopascals (hPa; see Figure 2-10). 4) Select the Back Softkey to return to the top-level softkeys. & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 70 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A