Garmin G2000 Pilots Guide - Page 341

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS Flight Management 21) Establish the course provided. When the course is established, activate Vectors To FInal. a) From Home, touch PROC. b) Touch the Activate Vectors to Final Button. Figure 5-200 Activating Vectors To Final d) The active leg is now the established course direct to CEGIX faf (see Figure 5-201). The flight phase changes to LPV on the HSI indicating the current phase of flight is in Approach Mode and the approach type is LPV. CDI scaling changes accordingly and is used much like a localizer when flying an ILS approach. The RVSI is no longer displayed and the VDI changes to the Glidepath Indicator (as shown in Figure 5-201) when the final approach course becomes active.  The descent continues through the FAF (CEGIX) using the Glidepath Indicator, as one would use a glideslope indicator, to obtain an altitude "AT or ABOVE" 8,100 feet at the FAF. Note the altitude restriction line under (At or Above) the altitude in the 'ALT' field in Figure 5-201. AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX Figure 5-201 Vectors To Final Approach is Now Active 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 327