Garmin G2000 Pilots Guide - Page 474

SYSTEM OVERVIEW FLIGHT INSTRUMENTS Automatic Flight Control System Heading Select Mode (HDG) Heading Select Mode is activated by pressing the HDG Key. Heading Select Mode acquires and maintains the Selected Heading. The Selected Heading is shown by a light blue bug on the HSI and in the box to the upper left of the HSI. Changing the selected heading Note: Pressing the HDG Knob synchronizes the Selected Heading to the current heading. The Selected Heading is adjusted using the HDG Knob. Pressing the CWS Button and hand-flying the aircraft does not change the Selected Heading. The autopilot guides the aircraft back to the Selected Heading upon release of the CWS Button. Turns are commanded in the same direction as Selected Heading Bug movement, even if the Bug is turned more than 180° from the present heading (e.g., a 270° turn to the right). However, Selected Heading changes of more than 340° at a time result in turn reversals. Heading Select Mode Active Pitch Mode Active EIS & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES Selected Heading Selected Heading Bug Command Bars Track Selected Heading Figure 7-21 Heading Select Mode 460 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A INDEX