Garmin G2000 Pilots Guide - Page 313
ACTIVATING AN APPROACH, Vectors To Final
![]() |
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE Flight Management Activating an Approach A previously loaded approach can be activated from the Procedures Screen. Activating a previously loaded approach using the Touchscreen Controller: 1) From Home, touch PROC 2) Touch the Activate Approach Button to activate the approach. Activating a previously loaded approach using the GDU Controller: 1) Press the PROC Key. The Procedures Window is displayed. 2) Highlight 'ACTIVATE APPROACH'. 3) Press the ENT Key or the small PFD Knob. The approach is activated. ACTIVATE APPROACH Selected Activate Approach Button Touchscreen Controller - Procedures Screen PFD - Procedures Window Figure 5-149 Activating an Approach on the Touchscreen Controller and on the PFD In many cases, it may be easiest to "load" the full approach while still some distance away, enroute to the destination airport. Later, if vectored to final, select 'Activate Vector-To-Final', which makes the inbound course to the FAF waypoint active. Activating a previously loaded approach with vectors to final using the Touchscreen Controller: 1) From Home, touch PROC 2) Touch the Activate Vectors To Final Button to activate vectors to final. Activating a previously loaded approach using the GDU Controller: 1) Press the PROC Key. The Procedures Window is displayed. 2) Highlight 'ACTIVATE VECTOR-TO-FINAL'. 3) Press the ENT Key or the small PFD Knob. Vector to final is activated. HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 299
![](/manual_guide/products/garmin-g2000-pilots-guide-b2a7ad8/313.png)