Garmin G2000 Pilots Guide - Page 241

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE Flight Management User Waypoint Name Button Type Button LAT/LON Button Temporary Button Comment Button Figure 5-66 Create User Waypoint Screen (defined by latitude/longitude) 5) If desired, change the waypoint comment. a) Touch the Comment Button to display the keypad. b) Use the keypad and the Enter Button to select the comment. 6) If desired, touch the Temporary Button to change the waypoint storage method. When the annunciator on the button is green, the waypoint is only stored until the next power cycle. When the annunciator is gray, the waypoint is stored until manually erased. 7) Touch the Create Button to accept the new user waypoint. Creating user waypoints from map pages: 1) Press the Joystick to activate the panning function and display the Map Pointer Options Screen on the Touchscreen Controller. 2) Use the Joystick to pan to the map location of the desired user waypoint. 3) Touch the Create User Waypoint Button. The Create User Waypoint Screen is displayed with the captured position. 4) Touch the user waypoint name button to display the keypad. 5) Use the keypad and the Enter Button to select a user waypoint name (up to six characters). 6) If desired, change the waypoint comment. The comment defaults to the abbreviated latitude/longitude of the user waypoint. a) Touch the Comment Button to display the keypad. b) Use the keypad and the Enter Button to select the comment. 7) Press the Create Button to create the new waypoint. 8) Press the Joystick to deactivate the panning function and return to the previous display on the Touchscreen Controller. HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 227